Ruixin Energy Equipmnet
Innovation Excellence
Add to Cart
Anti Rust FWG Plug Wireline Lock Mandrel Wear Resistant
Wireline Lock Mandrel FWG plug
Wireline Lock Mandrel FWG plug Bypass Blanking Plugs with Removable Mandrels are positive blank-off services designed
to seal off pressure from above and below. Wireline Lock Mandrel FWG plugs Blanking Plugs are equipped for Bottom No-Go
landing in Model “R” NonPorting Seating Nipples. The plugs are compatible with normal wireline equipment and procedures
Product description:
| Size | Lock cylinder salvage diameter | Balance bar fishing neck | Balance bar fishing tool |
| 1.875＂ | 2＂ | 1.375＂ | 2＂SB |
| 2.313＂ | 2.5＂ | 1.375＂ | 2＂SB |
| 2.813＂ | 3＂ | 1.375＂ | 2＂SB |
| 3.813＂ | 4＂ | 3.125＂ | 4＂SB |
Running of the plug:
1. firstly, connect the valve cap to the X/XN lock cylinder up and down to the preset working cylinder;
2. Connect the balance bar to the SB fishing tool and run down the well;
3. Lower it slowly after reaching the depth to be dropped, so that the P-type balance bar can enter the sealing hole of the bonnet;
4. Shook down slightly to make the P-type balance bar reach its position;
5. Shook down to cut off the shear pin of the running SB fishing tool;
6. Trip out and run the tool. At this time, the P-type balance bar remains in the well to complete the plugging. Note: Before running in the well, check whether the seal is intact.
Salvage of plugs:
1. run SB-type fishing tool to fish out p-type balance bar first;
2. Run GR fishing tool to fish X/XN lock cylinder.
Welcome to contact us at any time
