Ruixin Energy Equipmnet
Innovation Excellence
Add to Cart
1.5 inch Custom Slickline Wireline Running Tool X Running Tool
Introduction
An X running tool is a special tool used to run and set X/XN type lock mandrel. It can set the type X/XN lock mandrel into X/XN landing nipple selectively.
General Technical Parameters
| Nominal Size | Actual OD | Fishing Neck | Top Connection | Bottom Connection | |
|
1.5″
| 1.41″ | 1.188″ | 15/16″-10UN | 3/8-16UN″ | |
|
1.625″
| 1.593″ | 1.188″ | 15/16″-10UN | 3/8-16UN″ | |
|
1.875″
| 1.75″ | 1.375″ | 15/16″-10UN | 1/2-13UN″ | |
| 2.313″ | 2.175″ | 1.75″ | 15/16″-10UN | 5/8-11UN″ | |
| 2.75″ | 2.718″ | 2.313″ | 1-1/16″-10UN | 2/4-10UN | |
| 2.813″ | 2.72″ | 2.313″ | 1-1/16″-10UN | 3/4-10UN | |
| 2.875″ | 2.938″ | 2.313″ | 1-1/16″-10UN | 3/4-10UN | |
| 3.313″ | 3.406″ | 2.313″ | 1-1/16″-10UN | 1-3/8-12UN | |
| 3.813″ | 3.890″ | 2.313″ | 1-1/16″-10UN | 2-1/8-12UN | |
Structure Characteristics
The X running tool consists of fishing neck, inner sleeve, stop pin, main spring, spring housing, dog spring, split ring, locator dog, dog housing, crescent slide, retainer dog and mandrel. Enclosed is the assembly drawing.
Before operation, the retainer dog catches the inner fishing neck of lock mandrel, and then connect the lock mandrel to the mandrel by shear pin. Make the crescent slide stuck into the groove of mandrel to prevent movement.
Welcome to contact us at any time.
