
Add to Cart
Tool Trap Wireline Pressure Control Equipment
I. Product brief description:
Anti-drop device, also known as the next catcher. It is a safety device to prevent the tool string from accidentally falling into the well when the tool string is lifted out. It is installed below the blowout prevention pipe and above the blowout prevention valve.
II. Main technical parameters:
Number | Specification | Pressure rating |
1 | 2inch | 35MPa, 70 MPa |
2 | 2.5inch | 35MPa, 70 MPa |
3 | 3inch | 35MPa, 70 MPa |
4 | 4inch | 35MPa, 70 MPa |
Note: The specifications not listed in the above table can be provided according to customer needs
III. daily maintenance:
1. Do product test every time before going to the well;
2. After each use,
(1). Check whether the o-ring is damaged and replace it in time;
(2). Check whether the manual fork is flexible;
3. When not in use temporarily, you should bring the protective wire for storage.
Welcome to contact us at any time.