Ruixin Energy Equipmnet
Innovation Excellence
Add to Cart
1.5 Inch Wireline Skirted Magnet Sand Pump Bailer
I. Overview:
The strong magnetic overshot is used to magnetically absorb and salvage iron chips in wells.
II. the commonly used specifications and technical parameters:
| Actual O.D. | Fishneck O.D | Connections | Remarks |
| 1.25" | 1.187" | 15/16UN | |
| 1.5" | 1.375" | 15/16UN | |
| 1.75" | 1.375" | 15/16UN | |
| 2.0" | 1.75" | 1-1/16UN | |
| 2.5" | 1.75" | 1-1/16UN | |
| 3.0" | 1.75" | 1-1/16UN | |
| 4.0" | 1.75" | 1-1/16UN | |
| 5.0" | 2.313" | 1-1/16UN | |
| 6.0" | 3.125" | 1-9/16UN |
Tools can be manufactured to any size required.
III. Structural characteristics:
The strong magnetic overshot consists of an upper joint, a mandrel, a sleeve, a fixed sleeve and a magnet.
The upper joint has standard threads and fishing necks, and the main purpose of sleeve design is to prevent
sucked iron chips from falling into the well.
IV. Instructions for use:
1. The strong magnetic overshot is connected to the basic tool string and goes down the well;
2. Check whether the sleeve can move freely before running in the well;
3. When the clearance between the tool outer diameter and tubing is small, the tool should be opened first to
ensure the smooth running of the tool.
V. Routine maintenance:
When the tool is temporarily not in use, apply grease to the thread of the upper joint and place it with thread.
Wecome to contact us at any time.
